I just installed phpEd 5.8 and am working on a project which has a root of a networked drive.

I have the project active and am editing it, but in the bottom left it is flashing "Scanning (project name) project for parsing, mode=1"

It is VERY annoying and constantly using the CPU. Any idea what's going on?

Same problem here. I'm now downloading the 5814 and see if it is better then the 5812 i currently have.

Let me know if this solves the problem for you!

When the IDE opens the project for the first time, it has to build up Code Insight database. Depending on the disk performance and number of files, it may take from a few seconds up to some minutes. The worse case is project tree on the networked drive in combination with single-core CPU. IDE is fast enough to parse ~ 200-300 files in 1 second or about under 1.8GHz CPU, but networking drives can hardly provide files with this speed. Anyway, after the Code Insight database is initially built, it will be stored and re-used, no further problems are expected after that.
On the other hand, I'd recommend you to contact nusphere support and we'll check if there is anything to be improved.

I was having the exact same problem, I let phpEd scan run it's scan for over an hour just to see if it would make a difference (it didn't). The Fix for me was changing the mapped network drive to a full unc path - instant happiness!



[ note: My project is only 300+ files total, so size should not have been an issue here ]

Hope that helps someone else,

Steve

Thanks Steve,
Worked like a charm.

build 5816 has a fix for it also. no need to change your setup then.

You're right.



It's correct only if you're using local Apache.
I'd highly recommend not to "guess & try" Mapping->Remote root directory, please use Project Settings Wizard instead.