NuSphere Forums Forum Index
NuSphere Forums
Reply to topic
installed debugger ... but this version of Phped ...


Joined: 06 Jun 2010
Posts: 3
Reply with quote
Code:
 installed debugger module is 2.15.5, but this version of PhpED needs 3.9.1


i continue to have this massage

Code:
 
 .php file extension is associated with PHP
 dbglistener is listening on: local address: 127.0.0.1, port: 7869, upnp: 0
 dbg-wizard script was recently updated, file version is 2.1.2112
 dbg-wizard version is 2.1.2112
 platform WINNT/, supported
 php version 5.1.4, ts: 1, sapi: cgi-fcgi
 php.ini file is C:\PHP\php.ini
 php extension_dir c:\php\ext
 document root C:\Apache2\Apache2\htdocs\
 Error: (-121) version of installed debugger module is 2.15.5, but this version of PhpED needs 3.9.1
 please follow the instructions below and install debugger module:
debugger module dbg-php-5.1.dll is available
in C:\Programmi\NuSphere\PhpED\debugger\server\Windows\ directory
copy this module to
c:\php\ext directory on your local machine
add the following lines to C:\PHP\php.ini

zend_extension_ts="c:\php\ext\dbg-php-5.1.dll"
[debugger]
debugger.hosts_allow=127.0.0.1
debugger.hosts_deny=ALL
debugger.ports=7869

restart web server
launch phpinfo and check its output;make sure that one of the topmost
headers contains:
Zend Engine vX.X.0, Copyright (c) 1998-20xx Zend Technologies
with DBG v 3.9.X, (C) 2000, 20xx by Dmitri Dmitrienko

or open this FAQ page:
http://www.nusphere.com/kb/technicalfaq/howto_install_dbg_module.htm
and proceed with instructions
 fix the problem(s), then click [<< Back] button and repeat the tests


why???????
my phpinfo

Code:
PHP Logo
PHP Version 5.1.4

System    Windows NT PC-5391DA350B04 5.1 build 2600
Build Date    May 4 2006 10:30:29
Configure Command    cscript /nologo configure.js "--enable-snapshot-build" "--with-gd=shared"
Server API    CGI/FastCGI
Virtual Directory Support    enabled
Configuration File (php.ini) Path    C:\PHP\php.ini
PHP API    20041225
PHP Extension    20050922
Zend Extension    220051025
Debug Build    no
Thread Safety    enabled
Zend Memory Manager    enabled
IPv6 Support    enabled
Registered PHP Streams    php, file, http, ftp, compress.zlib
Registered Stream Socket Transports    tcp, udp
Registered Stream Filters    convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, zlib.*

Zend logo This program makes use of the Zend Scripting Language Engine:
Zend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technologies
    with DBG v2.15.5, (C) 2000,2007, by Dmitri Dmitrienko

PHP Credits
Configuration
PHP Core
Directive   Local Value   Master Value
allow_call_time_pass_reference   On   On
allow_url_fopen   On   On
always_populate_raw_post_data   Off   Off
arg_separator.input   &   &
arg_separator.output   &   &
asp_tags   Off   Off
auto_append_file   no value   no value
auto_globals_jit   On   On
auto_prepend_file   no value   no value
browscap   no value   no value
default_charset   no value   no value
default_mimetype   text/html   text/html
define_syslog_variables   Off   Off
disable_classes   no value   no value
disable_functions   no value   no value
display_errors   On   On
display_startup_errors   Off   Off
doc_root   no value   no value
docref_ext   no value   no value
docref_root   no value   no value
enable_dl   On   On
error_append_string   no value   no value
error_log   no value   no value
error_prepend_string   no value   no value
error_reporting   2039   2039
expose_php   On   On
extension_dir   c:\php\ext   c:\php\ext
file_uploads   On   On
highlight.bg   #FFFFFF   #FFFFFF
highlight.comment   #FF8000   #FF8000
highlight.default   #0000BB   #0000BB
highlight.html   #000000   #000000
highlight.keyword   #007700   #007700
highlight.string   #DD0000   #DD0000
html_errors   On   On
ignore_repeated_errors   Off   Off
ignore_repeated_source   Off   Off
ignore_user_abort   Off   Off
implicit_flush   Off   Off
include_path   .;C:\php5\pear   .;C:\php5\pear
log_errors   Off   Off
log_errors_max_len   1024   1024
magic_quotes_gpc   On   On
magic_quotes_runtime   Off   Off
magic_quotes_sybase   Off   Off
mail.force_extra_parameters   no value   no value
max_execution_time   300   300
max_input_time   300   300
open_basedir   no value   no value
output_buffering   no value   no value
output_handler   no value   no value
post_max_size   8M   8M
precision   12   12
realpath_cache_size   16K   16K
realpath_cache_ttl   120   120
register_argc_argv   On   On
register_globals   Off   Off
register_long_arrays   On   On
report_memleaks   On   On
report_zend_debug   On   On
safe_mode   Off   Off
safe_mode_exec_dir   no value   no value
safe_mode_gid   Off   Off
safe_mode_include_dir   no value   no value
sendmail_from   noreplya@192.168.0.10   noreplya@192.168.0.10
sendmail_path   no value   no value
serialize_precision   100   100
short_open_tag   On   On
SMTP   192.168.0.10   192.168.0.10
smtp_port   25   25
sql.safe_mode   Off   Off
track_errors   Off   Off
unserialize_callback_func   no value   no value
upload_max_filesize   2M   2M
upload_tmp_dir   C:\PHP\uploadtemp   C:\PHP\uploadtemp
user_dir   no value   no value
variables_order   EGPCS   EGPCS
xmlrpc_error_number   0   0
xmlrpc_errors   Off   Off
y2k_compliance   On   On
zend.ze1_compatibility_mode   Off   Off

bcmath
BCMath support    enabled

calendar
Calendar support    enabled

com_dotnet
COM support   enabled
DCOM support   disabled
.Net support   enabled

Directive   Local Value   Master Value
com.allow_dcom   0   0
com.autoregister_casesensitive   1   1
com.autoregister_typelib   0   0
com.autoregister_verbose   0   0
com.code_page   no value   no value
com.typelib_file   no value   no value

ctype
ctype functions    enabled

date
date/time support    enabled
Timezone Database Version    2006.1
Timezone Database    internal
Default timezone    Europe/Paris

Directive   Local Value   Master Value
date.default_latitude   31.7667   31.7667
date.default_longitude   35.2333   35.2333
date.sunrise_zenith   90.583333   90.583333
date.sunset_zenith   90.583333   90.583333
date.timezone   no value   no value

dbg
DBG php debugger, version 2.15.5, Copyright 2001, 2007, Dmitri Dmitrienko, www.nusphere.com

Version    2.15.5
Linked    as a shared library.
Profiler    compiled, disabled

Directive   Local Value   Master Value
debugger.enable_session_cookie   On   On
debugger.enabled   On   On
debugger.fail_silently   On   On
debugger.ignore_nops   Off   Off
debugger.JIT_enabled   Off   Off
debugger.JIT_host   clienthost   clienthost
debugger.JIT_level   3   3
debugger.JIT_port   7869   7869
debugger.profiler_enabled   Off   Off
debugger.session_nocache   On   On
debugger.timeout_seconds   300   300

dom
DOM/XML    enabled
DOM/XML API Version    20031129
libxml Version    2.6.22
HTML Support    enabled
XPath Support    enabled
XPointer Support    enabled
Schema Support    enabled
RelaxNG Support    enabled

ftp
FTP support    enabled

gd
GD Support    enabled
GD Version    bundled (2.0.28 compatible)
FreeType Support    enabled
FreeType Linkage    with freetype
FreeType Version    2.1.9
T1Lib Support    enabled
GIF Read Support    enabled
GIF Create Support    enabled
JPG Support    enabled
PNG Support    enabled
WBMP Support    enabled
XBM Support    enabled

hash
hash support   enabled
Hashing Engines   md4 md5 sha1 sha256 sha384 sha512 ripemd128 ripemd160 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru gost adler32 crc32 crc32b haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5

iconv
iconv support    enabled
iconv implementation    "libiconv"
iconv library version    1.9

Directive   Local Value   Master Value
iconv.input_encoding   ISO-8859-1   ISO-8859-1
iconv.internal_encoding   ISO-8859-1   ISO-8859-1
iconv.output_encoding   ISO-8859-1   ISO-8859-1

imap
IMAP c-Client Version    2004
SSL Support    enabled

libxml
libXML support    active
libXML Version    2.6.22
libXML streams    enabled

mbstring
Multibyte Support    enabled
Multibyte string engine    libmbfl
Multibyte (japanese) regex support    enabled
Multibyte regex (oniguruma) version    3.7.1

mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1.

Directive   Local Value   Master Value
mbstring.detect_order   no value   no value
mbstring.encoding_translation   Off   Off
mbstring.func_overload   0   0
mbstring.http_input   pass   pass
mbstring.http_output   pass   pass
mbstring.internal_encoding   ISO-8859-1   no value
mbstring.language   neutral   neutral
mbstring.strict_detection   Off   Off
mbstring.substitute_character   no value   no value

mssql
MSSQL Support   enabled
Active Persistent Links    0
Active Links    0
Library version    7.0

Directive   Local Value   Master Value
mssql.allow_persistent   On   On
mssql.batchsize   0   0
mssql.compatability_mode   Off   Off
mssql.connect_timeout   5   5
mssql.datetimeconvert   On   On
mssql.max_links   Unlimited   Unlimited
mssql.max_persistent   Unlimited   Unlimited
mssql.max_procs   Unlimited   Unlimited
mssql.min_error_severity   10   10
mssql.min_message_severity   10   10
mssql.secure_connection   Off   Off
mssql.textlimit   Server default   Server default
mssql.textsize   Server default   Server default
mssql.timeout   60   60

mysql
MySQL Support   enabled
Active Persistent Links    0
Active Links    0
Client API version    4.1.7

Directive   Local Value   Master Value
mysql.allow_persistent   On   On
mysql.connect_timeout   60   60
mysql.default_host   no value   no value
mysql.default_password   no value   no value
mysql.default_port   no value   no value
mysql.default_socket   no value   no value
mysql.default_user   no value   no value
mysql.max_links   Unlimited   Unlimited
mysql.max_persistent   Unlimited   Unlimited
mysql.trace_mode   Off   Off

odbc
ODBC Support   enabled
Active Persistent Links    0
Active Links    0
ODBC library    Win32

Directive   Local Value   Master Value
odbc.allow_persistent   On   On
odbc.check_persistent   On   On
odbc.default_db   no value   no value
odbc.default_pw   no value   no value
odbc.default_user   no value   no value
odbc.defaultbinmode   return as is   return as is
odbc.defaultlrl   return up to 4096 bytes   return up to 4096 bytes
odbc.max_links   Unlimited   Unlimited
odbc.max_persistent   Unlimited   Unlimited

pcre
PCRE (Perl Compatible Regular Expressions) Support    enabled
PCRE Library Version    6.6 06-Feb-2006

Reflection
Reflection   enabled
Version    $Id: php_reflection.c,v 1.164.2.33 2006/03/29 14:28:42 tony2001 Exp $

session
Session Support    enabled
Registered save handlers    files user
Registered serializer handlers    php php_binary wddx

Directive   Local Value   Master Value
session.auto_start   Off   Off
session.bug_compat_42   On   On
session.bug_compat_warn   On   On
session.cache_expire   180   180
session.cache_limiter   nocache   nocache
session.cookie_domain   no value   no value
session.cookie_lifetime   0   0
session.cookie_path   /   /
session.cookie_secure   Off   Off
session.entropy_file   no value   no value
session.entropy_length   0   0
session.gc_divisor   100   100
session.gc_maxlifetime   1440   1440
session.gc_probability   1   1
session.hash_bits_per_character   4   4
session.hash_function   0   0
session.name   PHPSESSID   PHPSESSID
session.referer_check   no value   no value
session.save_handler   files   files
session.save_path   C:\PHP\sessiondata   C:\PHP\sessiondata
session.serialize_handler   php   php
session.use_cookies   On   On
session.use_only_cookies   Off   Off
session.use_trans_sid   0   0

SimpleXML
Simplexml support   enabled
Revision    $Revision: 1.151.2.22 $
Schema support    enabled

SPL
SPL support   enabled
Interfaces    Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject
Classes    AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilterIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RuntimeException, SimpleXMLIterator, SplFileInfo, SplFileObject, SplObjectStorage, SplTempFileObject, UnderflowException, UnexpectedValueException

standard
Regex Library    Bundled library enabled
Dynamic Library Support    enabled
Internal Sendmail Support for Windows    enabled

Directive   Local Value   Master Value
assert.active   1   1
assert.bail   0   0
assert.callback   no value   no value
assert.quiet_eval   0   0
assert.warning   1   1
auto_detect_line_endings   0   0
default_socket_timeout   60   60
safe_mode_allowed_env_vars   PHP_   PHP_
safe_mode_protected_env_vars   LD_LIBRARY_PATH   LD_LIBRARY_PATH
url_rewriter.tags   a=href,area=href,frame=src,input=src,form=,fieldset=   a=href,area=href,frame=src,input=src,form=,fieldset=
user_agent   no value   no value

tokenizer
Tokenizer Support    enabled

wddx
WDDX Support   enabled
WDDX Session Serializer    enabled

xml
XML Support    active
XML Namespace Support    active
libxml2 Version    2.6.22

xmlreader
XMLReader    enabled

xmlwriter
XMLWriter    enabled

zlib
ZLib Support    enabled
Stream Wrapper support    compress.zlib://
Stream Filter support    zlib.inflate, zlib.deflate
Compiled Version    1.2.3
Linked Version    1.2.3

Directive   Local Value   Master Value
zlib.output_compression   Off   Off
zlib.output_compression_level   -1   -1
zlib.output_handler   no value   no value

Additional Modules
Module Name
dbase

Environment
Variable   Value
REDIRECT_STATUS    200
HTTP_HOST    localhost
HTTP_USER_AGENT    Mozilla/5.0 (Windows; U; Windows NT 5.1; it; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
HTTP_ACCEPT    text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
HTTP_ACCEPT_LANGUAGE    it-it,it;q=0.8,en-us;q=0.5,en;q=0.3
HTTP_ACCEPT_ENCODING    gzip,deflate
HTTP_ACCEPT_CHARSET    ISO-8859-1,utf-8;q=0.7,*;q=0.7
HTTP_KEEP_ALIVE    115
HTTP_CONNECTION    keep-alive
PATH    C:\Programmi\ActiveState Komodo IDE 5\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\MySQL\MySQL Server 5.1\bin;C:\Programmi\TortoiseSVN\bin
SystemRoot    C:\WINDOWS
COMSPEC    C:\WINDOWS\system32\cmd.exe
PATHEXT    .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
WINDIR    C:\WINDOWS
SERVER_SIGNATURE    <address>Apache/2.0.59 (Win32) Server at localhost Port 80</address>
SERVER_SOFTWARE    Apache/2.0.59 (Win32)
SERVER_NAME    localhost
SERVER_ADDR    127.0.0.1
SERVER_PORT    80
REMOTE_ADDR    127.0.0.1
DOCUMENT_ROOT    C:/Apache2/Apache2/htdocs
SERVER_ADMIN    administrator@localhost
SCRIPT_FILENAME    C:\Apache2\Apache2\htdocs\phpinfo.php
REMOTE_PORT    1109
REDIRECT_URL    /phpinfo.php
GATEWAY_INTERFACE    CGI/1.1
SERVER_PROTOCOL    HTTP/1.1
REQUEST_METHOD    GET
QUERY_STRING    no value
REQUEST_URI    /phpinfo.php
SCRIPT_NAME    /phpinfo.php
ORIG_PATH_TRANSLATED    C:\Apache2\Apache2\htdocs\phpinfo.php
ORIG_PATH_INFO    /phpinfo.php
ORIG_SCRIPT_NAME    /php/php-cgi.exe
ORIG_SCRIPT_FILENAME    C:/PHP/php-cgi.exe

PHP Variables
Variable   Value
_SERVER["REDIRECT_STATUS"]   200
_SERVER["HTTP_HOST"]   localhost
_SERVER["HTTP_USER_AGENT"]   Mozilla/5.0 (Windows; U; Windows NT 5.1; it; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
_SERVER["HTTP_ACCEPT"]   text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
_SERVER["HTTP_ACCEPT_LANGUAGE"]   it-it,it;q=0.8,en-us;q=0.5,en;q=0.3
_SERVER["HTTP_ACCEPT_ENCODING"]   gzip,deflate
_SERVER["HTTP_ACCEPT_CHARSET"]   ISO-8859-1,utf-8;q=0.7,*;q=0.7
_SERVER["HTTP_KEEP_ALIVE"]   115
_SERVER["HTTP_CONNECTION"]   keep-alive
_SERVER["PATH"]   C:\Programmi\ActiveState Komodo IDE 5\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\MySQL\MySQL Server 5.1\bin;C:\Programmi\TortoiseSVN\bin
_SERVER["SystemRoot"]   C:\WINDOWS
_SERVER["COMSPEC"]   C:\WINDOWS\system32\cmd.exe
_SERVER["PATHEXT"]   .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
_SERVER["WINDIR"]   C:\WINDOWS
_SERVER["SERVER_SIGNATURE"]   <address>Apache/2.0.59 (Win32) Server at localhost Port 80</address>
_SERVER["SERVER_SOFTWARE"]   Apache/2.0.59 (Win32)
_SERVER["SERVER_NAME"]   localhost
_SERVER["SERVER_ADDR"]   127.0.0.1
_SERVER["SERVER_PORT"]   80
_SERVER["REMOTE_ADDR"]   127.0.0.1
_SERVER["DOCUMENT_ROOT"]   C:/Apache2/Apache2/htdocs
_SERVER["SERVER_ADMIN"]   administrator@localhost
_SERVER["SCRIPT_FILENAME"]   C:\Apache2\Apache2\htdocs\phpinfo.php
_SERVER["REMOTE_PORT"]   1109
_SERVER["REDIRECT_URL"]   /phpinfo.php
_SERVER["GATEWAY_INTERFACE"]   CGI/1.1
_SERVER["SERVER_PROTOCOL"]   HTTP/1.1
_SERVER["REQUEST_METHOD"]   GET
_SERVER["QUERY_STRING"]   no value
_SERVER["REQUEST_URI"]   /phpinfo.php
_SERVER["SCRIPT_NAME"]   /phpinfo.php
_SERVER["ORIG_PATH_TRANSLATED"]   C:\Apache2\Apache2\htdocs\phpinfo.php
_SERVER["ORIG_PATH_INFO"]   /phpinfo.php
_SERVER["ORIG_SCRIPT_NAME"]   /php/php-cgi.exe
_SERVER["ORIG_SCRIPT_FILENAME"]   C:/PHP/php-cgi.exe
_SERVER["PHP_SELF"]   /phpinfo.php
_SERVER["REQUEST_TIME"]   1275832610
_SERVER["argv"]   

Array

_SERVER["argc"]   0
_ENV["REDIRECT_STATUS"]   200
_ENV["HTTP_HOST"]   localhost
_ENV["HTTP_USER_AGENT"]   Mozilla/5.0 (Windows; U; Windows NT 5.1; it; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
_ENV["HTTP_ACCEPT"]   text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
_ENV["HTTP_ACCEPT_LANGUAGE"]   it-it,it;q=0.8,en-us;q=0.5,en;q=0.3
_ENV["HTTP_ACCEPT_ENCODING"]   gzip,deflate
_ENV["HTTP_ACCEPT_CHARSET"]   ISO-8859-1,utf-8;q=0.7,*;q=0.7
_ENV["HTTP_KEEP_ALIVE"]   115
_ENV["HTTP_CONNECTION"]   keep-alive
_ENV["PATH"]   C:\Programmi\ActiveState Komodo IDE 5\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\MySQL\MySQL Server 5.1\bin;C:\Programmi\TortoiseSVN\bin
_ENV["SystemRoot"]   C:\WINDOWS
_ENV["COMSPEC"]   C:\WINDOWS\system32\cmd.exe
_ENV["PATHEXT"]   .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
_ENV["WINDIR"]   C:\WINDOWS
_ENV["SERVER_SIGNATURE"]   <address>Apache/2.0.59 (Win32) Server at localhost Port 80</address>
_ENV["SERVER_SOFTWARE"]   Apache/2.0.59 (Win32)
_ENV["SERVER_NAME"]   localhost
_ENV["SERVER_ADDR"]   127.0.0.1
_ENV["SERVER_PORT"]   80
_ENV["REMOTE_ADDR"]   127.0.0.1
_ENV["DOCUMENT_ROOT"]   C:/Apache2/Apache2/htdocs
_ENV["SERVER_ADMIN"]   administrator@localhost
_ENV["SCRIPT_FILENAME"]   C:\Apache2\Apache2\htdocs\phpinfo.php
_ENV["REMOTE_PORT"]   1109
_ENV["REDIRECT_URL"]   /phpinfo.php
_ENV["GATEWAY_INTERFACE"]   CGI/1.1
_ENV["SERVER_PROTOCOL"]   HTTP/1.1
_ENV["REQUEST_METHOD"]   GET
_ENV["QUERY_STRING"]   no value
_ENV["REQUEST_URI"]   /phpinfo.php
_ENV["SCRIPT_NAME"]   /phpinfo.php
_ENV["ORIG_PATH_TRANSLATED"]   C:\Apache2\Apache2\htdocs\phpinfo.php
_ENV["ORIG_PATH_INFO"]   /phpinfo.php
_ENV["ORIG_SCRIPT_NAME"]   /php/php-cgi.exe
_ENV["ORIG_SCRIPT_FILENAME"]   C:/PHP/php-cgi.exe

PHP License

This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact license@php.net.

View user's profileFind all posts by [muuu]Send private message
Veteran

Joined: 06 Jun 2007
Posts: 289
Location: Vancouver, Canada
Reply with quote
You are using an old version of the DBG module (dbg-php-5.1.dll) on the server that is not compatible with the version of PhpED that you are using on your computer. To fix the problem, install the newer version of the DBG module on your server.

_________________
Smile
View user's profileFind all posts by annoSend private messageVisit poster's website


Joined: 06 Jun 2010
Posts: 3
Reply with quote
anno wrote:
You are using an old version of the DBG module (dbg-php-5.1.dll) on the server that is not compatible with the version of PhpED that you are using on your computer. To fix the problem, install the newer version of the DBG module on your server.

Code:
DBG 3.1.11 released (the most recent commercial version)

    * All php versions from 4.3 up to 5.2 are supported
    * DBG PHP Debugger is available as part of NuSphere PhpED 5.0 product (not available from this site)
    * See DBG PHP Debugger integrated into NuSphere PHP IDE.
    * See NuSphere site for further details.

it says that is included by phpwed so where it is?? where can I get thsi new version of dbg??
thanks in advise
View user's profileFind all posts by [muuu]Send private message
Veteran

Joined: 06 Jun 2007
Posts: 289
Location: Vancouver, Canada
Reply with quote
Copies for supported servers are placed in your installation folder, e.g. C:\Program Files\NuSphere\PhpED\debugger\server Wink

_________________
Smile
View user's profileFind all posts by annoSend private messageVisit poster's website


Joined: 06 Jun 2010
Posts: 3
Reply with quote
anno wrote:
Copies for supported servers are placed in your installation folder, e.g. C:\Program Files\NuSphere\PhpED\debugger\server Wink


I already copied the file dbg-php-5.1.dll to my ext file but the serve don't load it
this is my php.ini if you something wrong tell me

Code:
; xdebug config added by Komodo

;zend_extension="C:\PHP\ext\dbg-php-5.1.dll"
zend_extension_ts="c:\php\ext\dbg-php-5.1.dll"
debugger.enabled=On
[debugger]
debugger.hosts_allow=127.0.0.1
debugger.hosts_deny=ALL
debugger.ports=7869
;zend_extension=C:\PHP\ext\php_xdebug.dll
;zend_extension_ts=C:\PHP\ext\php_xdebug.dll
;xdebug.remote_enable=1
;xdebug.remote_handler=dbgp
;xdebug.remote_mode=req
;xdebug.remote_port=9000
;cgi.force_redirect = 0
[PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.


;;;;;;;;;;;;;;;;;;;
; About php.ini   ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior.  In order for PHP to
; read it, it must be named 'php.ini'.  PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory.  The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple.  Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; |        bitwise OR
; &        bitwise AND
; ~        bitwise NOT
; !        boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
;  foo =         ; sets foo to an empty string
;  foo = none    ; sets foo to an empty string
;  foo = "none"  ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).


;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off

; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On

; Allow ASP-style <% %> tags.
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
precision    =  12

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On

; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit.  You can enable output buffering during runtime by calling the output
; buffering functions.  You can also enable output buffering for all files by
; setting this directive to On.  If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = Off

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
;       directive. Instead, explicitly set the output handler using ob_start().
;       Using this ini directive may cause problems unless you know what script
;       is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
;       and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
;       Instead you must use zlib.output_handler.
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
;       outputs chunks that are few hundreds bytes each as a result of
;       compression. If you prefer a larger chunk size for better
;       performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
;       output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; Whether to enable the ability to force arguments to be passed by reference
; at function call time.  This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend.  The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration.  You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = On

;
; Safe Mode
;
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here.  By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note:  If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv().  These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <span style="color: ???????"> would work.
;highlight.string  = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg      = #FFFFFF
;highlight.default = #0000BB
;highlight.html    = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long request, which may end up
; being interrupted by the user or a browser timing out.
; ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; realpath_cache_size=16k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; realpath_cache_ttl=120

;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header).  It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time = 300     ; Maximum execution time of each script, in seconds
max_input_time = 300   ; Maximum amount of time each script may spend parsing request data
memory_limit = 80M      ; Maximum amount of memory a script may consume (8MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field.  Or each number up to get desired error
; reporting level
; E_ALL             - All errors and warnings (doesn't include E_STRICT)
; E_ERROR           - fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often result
;                     from a bug in your code, but it's possible that it was
;                     intentional (e.g., using an uninitialized variable and
;                     relying on the fact it's automatically initialized to an
;                     empty string)
; E_STRICT         - run-time notices, enable to have PHP suggest changes
;                     to your code which will ensure the best interoperability
;                     and forward compatibility of your code
; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
;
; Examples:
;
;   - Show all errors, except for notices and coding standards warnings
;
error_reporting = E_ALL & ~E_NOTICE
;
;   - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
;
;   - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
;   - Show all errors except for notices and coding standards warnings
;
;error_reporting  = E_ALL; display all errors, warnings and notices

; Print out errors (as a part of the output).  For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below).  Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = On

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed.  It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = Off

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; sourcelines.
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html

; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"

; String to output after an error message.
;error_append_string = "</font>"

; Log errors to specified file.
;error_log = filename

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC).  Registration is done from left to right, newer
; values override older values.
variables_order = "EGPCS"

; Whether or not to register the EGPCS variables as global variables.  You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data.  This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on;  Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off

; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends.  If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = On

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information).  If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
post_max_size = 8M

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = On

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header.  To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On


;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues.  The alternate is to use the
; ;cgi.force_redirect configuration below
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =

; Directory in which the loadable extensions (modules) reside.
extension_dir = "c:\php\ext"

; Whether or not to enable the dl() function.  The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On

; ;cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers.  Left undefined, PHP turns this on by default.  You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; ;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1

; if ;cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution.  Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client.  This allows IIS to define the
; security context that the request runs under.  mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS.  Default is zero.
; fastcgi.impersonate = 1;

; Disable logging through FastCGI connection
; fastcgi.log = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0


;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
upload_tmp_dir = C:\PHP\uploadtemp  ; temporary directory for HTTP uploaded files (will use system default if not
specified)

; Maximum allowed size for uploaded files.
upload_max_filesize = 2M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Define the anonymous ftp password (your email address)
;from="john@doe.com"

; Define the User-Agent string
; user_agent="PHP"

; Default timeout for socket based streams (seconds)
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
;   extension=modulename.extension
;
; For example, on Windows:
;
;   extension=msql.dll
;
; ... or under UNIX:
;
;   extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here.  Specify the location of the extension with the
; extension_dir directive above.


; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.
;xdebug.remote_enable=1
;xdebug.remote_handler=dbgp
;xdebug.remote_host=127.0.0.1
;xdebug.remote_port=9000
;xdebug.remote_mode=req
;xdebug.idekey=default
;xdebug.remote_log="C:\Apache2\Apache2\htdocs\tmp\;xdebug.log"
;xdebug.show_exception_trace=0
;xdebug.show_local_vars=9
;xdebug.show_mem_delta=0
;xdebug.trace_format=0
;xdebug.profiler_enable  = 1
;xdebug.profiler_output_dir ="C:\Apache2\Apache2\htdocs\tmp"

;zend_extension_ts = c:\php\ext\php_;xdebug.dll
;zend_extension=c:\php\ext\php_;xdebug.dll
;extension=php_;xdebug.dll
;extension=php_mbstring.dll
;extension=php_bz2.dll
;extension=php_curl.dll
;extension=php_dba.dll
extension=php_dbase.dll
extension=dbg-php-5.1.dll
;extension=php_dbg.dll
;extension=php_exif.dll
;extension=php_fdf.dll
;extension=php_filepro.dll
extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_ifx.dll
extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_ldap.dll
extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_mime_magic.dll
;extension=php_ming.dll
extension=php_mssql.dll
;extension=php_msql.dll
extension=php_mysql.dll
;extension=php_pdo.dll
;extension=php_pdo_informix.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_oracle.dll
;extension=php_pgsql.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_sockets.dll
;extension=php_sqlite.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=pdflib.dll

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
;date.timezone =

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables  = Off

[mail function]
; For Win32 only.
SMTP = 192.168.0.10 ; for Win32 only
smtp_port = 25
sendmail_from= noreplya@192.168.0.10

; For Win32 only.
;sendmail_from = me@example.com

; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db    =  Not yet implemented
;odbc.default_user  =  Not yet implemented
;odbc.default_pw    =  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields.  Returns number of bytes to variables.  0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect().  If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

; Maximum time (in secondes) for connect timeout. -1 means no limit
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off

[MySQLi]

; Maximum number of links.  -1 means no limit.
mysqli.max_links = -1

; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
msql.max_links = -1

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings.  This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host = phpinformix

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user = informix

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =

; Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns.  May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1.  In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler.  In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; As of PHP 4.0.1, you can define the path as:
;
;     session.save_path = "N;/path"
;
; where N is an integer.  Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories.  This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
;         You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
;         use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
;     session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"

; Whether to use cookies.
session.use_cookies = 1

; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1

; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

; The domain for which the cookie is valid.
session.cookie_domain =

; Handler used to serialize data.  php is the standard serializer of PHP.
session.serialize_handler = php

; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.

session.gc_probability = 1
session.gc_divisor     = 100

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
;       (see session.save_path above), then garbage collection does *not*
;       happen automatically.  You will need to do your own garbage
;       collection through a shell script, cron entry, or some other method.
;       For example, the following script would is the equivalent of
;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
;          cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.

session.bug_compat_42 = 1
session.bug_compat_warn = 1

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =

; How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
;   to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
;   in publically accessible computer.
; - User may access your site with the same session ID
;   always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0

; Select a hash function
; 0: MD5   (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
;
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 4

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs.  If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
session.save_path= C:\PHP\sessiondata    ; argument passed to save_handler

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch.  0 = all records in one batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don't bail out by default.
;assert.bail = Off

; User-function to be called if an assertion fails.
;assert.callback = 0

; Eval the expression with current error_reporting().  Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0

[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"

; Default port to connect to.
pfpro.defaultport = 443

; Default timeout in seconds.
pfpro.defaulttimeout = 30

; Default proxy IP address (if required).
;pfpro.proxyaddress =

; Default proxy port.
;pfpro.proxyport =

; Default proxy logon.
;pfpro.proxylogon =

; Default proxy password.
;pfpro.proxypassword =

[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true

[mbstring]
; language for internal character representation.
;mbstring.language = Japanese

; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP

; http input encoding.
;mbstring.http_input = auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS

; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
;       portable libs/applications.
;mbstring.encoding_translation = Off

; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto

; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;

; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0

; enable strict encoding detection.
;mbstring.strict_encoding = Off

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000

[gd]
; Tell the jpeg decode to libjpeg warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
;gd.jpeg_ignore_warning = 0
 
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel    = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel    = JIS

[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off

[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400

; Local Variables:
; tab-width: 4
; End:

;[debugger]
;debugger.enabled = true
;debugger.profiler_enabled = true
;debugger.JIT_host = localhost
;debugger.JIT_port = 80
View user's profileFind all posts by [muuu]Send private message
installed debugger ... but this version of Phped ...
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Reply to topic